How to Slim Down a Shirt | A DIY Refashion

It's been a good while since I took on a refashion so I revved that engine back up last week and finally started going through my small pile of to-be-sewns...the small pile that was a large pile before I counted my losses and donated half of the clothes before we moved last year.  Can't say I miss them...

Anyway, I found this shirt on a clearance rack at Target, oh, maybe two years ago, for something like $6.  I snatched it up even though it was two sizes too big for me because I loved the print and I knew I could easily take it in.  So, it went straight to the refashion pile.  Straight to that pile were it sat and sat...

I'm pretty sure I've written a tutorial on how to do this before but I'm also pretty sure it was a maternity top and I've gained some efficiency knowledge since then.  So, round two.  One of the easiest, beginner-level sewing things to do when you're talking refashioning shirts, is taking them in at the sides to fit you.  Really this is easiest with sleeveless shirts like the one I've got here today but sometimes you can follow up and along the sleeve of a shirt to get the same result with sleeved tops.  I'll make a mental note to do one of those someday too.

There are two easy ways to do this.  1)  Use a shirt you already have, and like the fit of, as a template or 2)  inch your way in little by little until you get the fit you want, following the existing edge.  For this post, I went the template route.

Things you'll need? 
Well, I wish I could slap a "no-sew" label on this one but alas, you'll need a sewing machine for this unless you're an Olympic hand seamstress.  If you're a beginner and just want to start slow and with straight lines, this Brother* is reasonable, has good reviews, and will do ya just fine for lots and lots of sewing projects.  This one* is even cheaper but without many stitch options.  If you've got a little bit of sewing skill under your belt or just want to jump in head-first and with a good machine, this one* is the newer model of mine.  I've had my dear Brother for oh, six or seven years now and LOVE it.  I've had zero problems with it.  It sews everything I've ever made and even embroiders so I've been able to make our Christmas stockings and then monogram them all with one machine.  Two thumbs way up.
You'll also probably need a sewing scissors* (I'd write "sewing" on it so no one thinks they can use it for anything else), a seam ripper* just in case, a sewing pencil* (I always use my kids' washable markers) and of course, a shirt that's too big on you.

Here's my shirt in it's original state:

It could've had a chance at flowy if the arm holes weren't the size of Texas on me.

Hand-Painted Curtains | DIY

One of the first rooms we set straight in this house was the kids' shared bedroom.  You can see the "reveal" here.  In that reveal though, I mentioned that it wasn't finished (is any room ever finished really?) and that I still wanted to add a little bit more flavor before we called it quits.  Fast forward several months to last week, I finally got around to it.  The kids are helping me with a couple more projects right now and then I'll post another (more complete) reveal, but this here is all about the existing curtains I painted.  

I bought these black-out curtains* for their room in the 96" length and they're really great, especially for the price (I got mine via the Warehouse too so they were even cheaper!), but it turns out that they're even better if you want to add a little bit of pizzazz in the form of paint.

Here's what they looked like right after we bought them last year and got them hung:
(We used curtain rods similar to these*.)

With the white walls, they were a little too boring for a kids' room but I had plans...it just took me awhile to execute.  Before I show you what they look like now, let's go into how I did it.

Backyard Clean-up + Landscaping Tips

Last weekend we started a project that kind of snowballed quickly. It's something that's on our to-do list but something that's going to require a good deal of time, possibly moolah, and good weather so it's on the bottom end of that list.



Landscaping.  There's a lot of it to be done.  Last weekend though, we worked on the longest plant bed of all that runs along the back of the house.  We started taking out plants touching the house and  cutting back some of the plants along the patio area that just keep growing up and then didn't quit until we had the whole bed cleaned out.  Here's what that bed looked like when we moved in last spring:

And here's what it looks like now, after a few hours of muscle and bent knees (seriously, my hamstrings hurt for three days):

Updating an Old Dresser | A Makeover

Right after we got married, Anthony and I shared a twin mattress on the floor in our first house because it was the only mattress we had (mine from college).  That set-up lasted a few weeks until we bought a new mattress and a secondhand bedroom set from a local thrift store.  We stripped the shiny varnish from the set of dressers and gave them a coat of satin poly to modernize them a little (key word:  a little).  You can see them in our first house tour.  We also added some new hardware I found on clearance at Lowe's.  (Was this the beginning of a lifetime of furniture makeovers?  Looks like it.)  We used that set for years and are still using the bed (though it looks a smidge different), but the dressers have hopped around the houses we've had.  The tall dresser eventually got traded for another tall dresser (that matched a long dresser we bought from someone online) and the long dresser went from kid's room to kids' room and landed in the living room in this house where it held the TV.  When I spotted a longer dresser on Facebook marketplace a couple of months ago, we decided to swipe up that one and swap it out with our old one in the living room.  Did you follow all that?  Basically, we still have this dresser we bought as newlyweds but now we have no place for it. 


It sat in the breakfast nook for a few weeks which drove us all crazy so, pushing all sentiment aside (which wasn't easy), we decided to sell it.  But it sat and sat and sat with very little interest.  *womp womp*  I might've been asking too much considering it still looks like it hails from the 1980's but I was trying to recoup the money we spent on that "new" dresser.

We knew something was going to have to change to get this thing out the door and we didn't really want it to be the price since it's in great shape and has great bones so...

The 'Blank Slate' Dining Room

Last week we fixed walls, prepped, primed, and painted the dining room and shared it all in a bunch of Instagram stories.  I didn't share an after photo though because I like to reserve the good stuff for the blog, ya know?  ;)  Sorry Insta, you'll always be second best.

But the truth is, the after was (and still very much is) very underwhelming.  I was so excited for this huge transformation that was taking shape with the power of paint right in front of my very eyes and then...well it was better than it was because paint always trumps bare drywall but even though it doesn't seem possible, it seemed to get more boring.


I told you...womp, womp.  Maybe it has to do with the fact that the walls are bare and the hutch is camouflaging it.  Well, that's going to have to change and I'll give you a few ideas how but first, let's do that thing we always do and take a little trot down memory lane.