Laced

Once upon a very long time ago, my sister and I were inspired by some strappy sandals we saw somewhere; who knows where anymore.  I’m talking like ten years ago.  But, we were inspired and we had to have some, but for some reason we wanted to make our own (probably because the real deals were out of our college student budgets).  So we set out for the perfect shoe to refashion.  I remember it took us awhile.  We both always had our eyes peeled and then one day, while we were strolling the aisles of our local Old Navy, we found the perfect sandals to use and they were on clearance (for $8, if I remember correctly).  We snatched them up and got to work…but what I really mean is we snatched them up and Farrah got to work.  Anyway, enough with the vague talk. 

These were the sandals we bought, only this is after we started our project.

Before we started, they looked similar to these Old Navy sandals (currently on sale for $13!)…

…but had some sort of embellishment on the top that we removed.

So I’ve had these unfinished sandals tucked away for all these years and last week I finally pulled them back out to finish what we started.  And now I am scratching my head in wonder that we didn’t finish long ago because they’re amazing done!

 

Here’s how I made them and how you can too!

As you can see in the picture of the sandals Farrah and I found above, we clipped the straps so that they were about two inches long.
  

And then Farrah started sewing the unattached end to the attached end by folding it over and making a few stitches at the base of the strap, making sure to stitch through both ends. 

[Allow me to show you by continuing where we left off.]

She got half of my straps done (and probably none of her own because she’s selfless like that) so I finished stitching the other three down this week.  I’m not sure why we decided to fold down the strap so that the end was visible from the outside of the shoe but we probably should’ve folded them in so that they were less noticeable.  Excitement took our brain apparently.  Or maybe we just didn’t want that part rubbing against our feet.  Either way, in the name of consistency, I sewed the rest of them the same way.  Also, I should mention that when we cut the straps, we cut them at a diagonal so that when they were folded over, the end would run along the bottom of the shoe (look two photos up for a visual).  Make sense?  I hope so…

And that was that.  The shoes were ready for the fabric ribbon I made.

I had thee worst time choosing fabric for this project.  Too many options, too little time, and too many little hands grabbing whatever they could while I was looking.  I walked into JoAnn Fabrics that day hoping to find one fabric but walked out with two.  But that’s the great thing about these sandals – the options are endless! 

Here are the two I grabbed:

[left & right]
I only bought six inches of each fabric and only ended up paying $3.50 total (I don’t think either were on sale and I didn’t have a coupon).  First things first, I needed to straighten out the fabric.  The lady that cut the fabric for me was awesome.  She made sure to cut straight across the design.  Whoever had previously cut the fabric didn’t do that so I had one wonky side and one straight side.  So, I just trimmed off the jagged side; getting it nice and straight.


Then I cut each piece in half – two shoes; two ribbons.  I didn’t measure because I’m lazy pretty good at eyeballing.
 

Now it gets a little picture-happy.  I went full on with the details on how to make fabric ribbons, so if you’re not interested or you’d rather go the easy (smart?) route and use pre-made ribbon, you might want to scroll right on past.

I made two different types of ribbons, a pair with pointed ends and a pair with squared ends.  We’ll get the point-ended ones out of the way first because they’re a tad more difficult (but not hard!…you could totally do this!).

First, I grabbed a couple of large safety pins and pinned them to the middle of each end, just past the selvage.

Then I folded the entire length of my fabric in half; right sides together.
 

Next I sewed together my unfinished edges, making a curve at the start of my sewing.  This gave me my pointed ends.  The picture below illustrates what I mean when I say I made a curve.

The red represents my sewing.  Starting at the folded edge of the fabric and right under the selvage, I sewed a straight stitch that curved to the opposite side and down.  I made sure to backstitch at the start too to make sure my stitches stayed put.

So then I sewed about a foot down my ribbon, stopped, and backstitched.  Then I did the same curved stitch to the other end of the ribbon but this time sewed until I was about three inches from my previous stitch.  Then I stopped and backstitched.  Now I had a long tube of fabric with a hole in it that was about three inches wide.
  
This hole is critical in getting the fabric right-side out.

Before I went right-side out though, I trimmed the excess fabric off my curved ends with a pinking shears.  A regular scissors would work too; pinking shears just give a cut that will supposedly help prevent fraying. 

Next, I went to one end, found my safety pin, and started feeding it back through the fabric tube I had just sewn.  It’ll bring the end of the ribbon along with it.  This is is how I got my fabric right-side out.


I fed it through and pulled it out the small hole I left in the hem.
 

I did the same to the other end; fed the safety pin through until my fabric was right-side out.

Then I removed my pins and wiggled the pointed ends outward to get them as pointed as I could get them. 

The last thing I needed to do was sew the hole shut.  To do this I fold the unfinished hems of the hole in like this:

And then I went over those folds/the hole with a quick straight stitch.
 

Here it is closed:
 

I purposely made sure the hole was about a foot in from one end so that it would end up being wound up in the knot of the ribbon once it was on the shoe and on my foot.  In other words, not noticeable at all.

Now onto the square-ended ribbons.

First, I cut off the selvage on the ends.  I needed to turn my ends in and hem them later and I didn’t want the selvage showing.


Then I placed a safety pin in the middle of just one end.


Next I folded the entire piece of fabric in half length-wise and sewed straight stitch down the unfinished edge; no curve this time.  After I did that, I was left with one long tube of fabric, inside-out and open on both ends.

To get my fabric right-side out, I guided the safety pin through the fabric tube just like I did with the navy and white ribbons except that this time, it came out the end.  It has to come out the opposite end it’s pinned in so you have to push it all the way through the entire length of the tube.  Once it’s out, pulling the fabric right-side out is easy peasy.
 

So then I had two unfinished, square ends.
  

To finish them, I folded the end of the fabric inside of the tube just a little; enough to get a stitch across the end to hold everything in place.
 
[And also my kids woke up from their naps…all three of them.]
[Don’t mind the nail polish…or what’s left of it.]

Last, I sewed a straight stitch across the opening, making sure to backstitch at each end.
 

Here’s a picture of the first end I sewed shut.
It didn’t look the greatest because I should’ve started sewing on the end without the stitching over to the end with the stitching.  Because I didn’t, my fabric got stuck in my machine and made a little thread mess.  But, you get the picture of what I mean when I say I sewed the ends shut, right?
 
So, there you have it!  Do-it-yourself fabric ribbons, sashes, whatever you want to call them!

Of course you can always just grab some pre-made ribbon at your local fabric store and that would work just great too!  Or, you can cut up an old tee or something made of a no-fray jersey and get ribbons that way!  However you get them, I think you’ll agree that the options really are endless!  There is a way to pair these with most of your closet just by changing out the ribbon!  I actually stole some ribbon from another pair of shoes in my closet and tried those too!  They were a little shorter than my fabric ribbons so I tried tying a different way – through the front loop, back to the side loops, up over the top of my foot where they criss-crossed, and back around to tie behind my ankle.

With the shoes themselves at $8 and the ribbons coming in at $3.50, my total investment so far on these kicks is $11.50.  Uh-mazing.  :)

Here are a few ways I’ll wear them:
 


Oh!  I forgot to mention how COMFORTABLE they are!  I love going barefoot but since that’s not the most socially acceptable option these days, just having a soft strap of cloth holding my sole on is the next best thing.  My feet are loving it!

So anyway, as you might imagine, I have plans to make the girls some because how cute would they look on little feet? 

Too cute!

.           .           .

Apparently Old Navy makes great shoes and great shoes with lots of potential because I recently refashioned a couple of pairs for the girls too!  See them here.

Check ya lata!  

The Hutch Makeover

Or should I say ‘makeunder’ since I was going for a simpler look?  Or is it just weird that I’m writing a whole post about a hutch makeover in general?  Most DIY bloggers showcase entire room makeovers including hutches that they beautifully styled and primped.  Well, not me.  I’d show you our whole living room but the fact is it’s still a little bit of a smorgasbord of things and getting to a reveal is going to take a little bit longer for this tortoise.  But, you can see the mirror I painted here and the pillows hanging out here if you so wish.  :)

So, shall we move on?  Sure thing.

Here was the hutch a few weeks ago: 
 
Was.  It was filled with lots of hand-me-downs (that I truly love) like my grandmother’s milk glass, some frames with homemade art, some thrifted vases, and other random things.  Atop it was another jumble of things that gave the whole thing a little bit of a country vibe which is cool but which is also not my style.

Not on the agenda (or in the budget) though, was a change…until I got my very first issue of HGTV magazine a few months ago.  One page got me and got me good.
  
It was the after picture of a hutch they made over and it wasn’t really the hutch as much as the way they styled it.  As I was looking at all of the things inside it, I realized that I had a lot of similar items in my house.  So, that day during naptime, I took everything out of our hutch and refilled it with those similar items.

Here’s what it’s looking like today:


On top of the things I grabbed from amongst our own things to refill it, a bunch of little diy projects went into it, and also a few thrifted treasures.  Bear with me while I elaborate.  :)



Half of the hardcover books were recently thrifted; purchased based on the color of their spine and that’s it.  The large green and yellow vases were thrifted a long time ago as were the two gold candlesticks, the aqua vase, and the clear bubble candle pillar.
Some of the milk glass made the cut to go back in and the rest will be put elsewhere in the house.



The white storage box on the top shelf was the box my best friend sent last year holding inside it a request to be a bridesmaid in her wedding (this ‘gram).  I can’t part with it.


It used to be black.
 
You can see the rough section on the box where I ripped off the packing tape that held it closed on it’s journey here.  Off with the tape came the top layer of the paper the box is made out of.  I was hoping that, even though it wouldn’t make those spots smooth, a little paint would disguise that whole issue.

So, I gave it a quick coat of spray primer and then a coat of white spray paint.
 

Primed:


Unfortunately, the paint didn’t do the greatest job of sticking and not soaking into the paper where the tape had been ripped off.  So, after the spray paint dried, I painted the whole box with some white acrylic paint I had and that did the trick.


Then I grabbed my gold paint pen (purchased for this project but that failed) and added a little fun to the area where the tape was to further hide the roughness.


Now it fits right in.


The gray and white striped box on the right side of the hutch was a perfume box I’ve had pictures stored in forever.

 
It’s made of heavy duty cardboard.  I just spray painted it white and then laid some tape across it in strips.  Then I painted over the taped and un-taped stripes using some gray paint (leftover from this stenciled rug project), and then carefully removed the tape to reveal the new gray and white stripes.  The blue cut-out vase atop it was a Dirt Cheap find and the sea urchin was diy-ed (tutorial here).  The wood box on the bottom shelf is a bible box I’ve had since I was a wee girl.  I thought about sanding it down to get a more natural wood look but it has a few small latches and hinges to go around and just seemed a little too tedious of a project.

On top of the hutch I did some much needed restyling.  The mercury glass vase was diy-ed (tutorial here in yesterday’s post).  The orb-ish thing is just an embroidery hoop that I bought several months ago for a project that didn’t come to fruition.  The minty vase was a thrift find.  The large frame was an amazing thrift find a few weeks ago!  I got it for 50 cents!  It’s big and metal and it’s the same mint-green color as our sectional.  The print inside it was a thrift find from a few years ago but I just saw the same print on clearance at Hobby Lobby a few weeks ago for under $2.  I cut it to fit the frame.
 

You might’ve also noticed the gorgeous knobs this sweet thing’s sporting.


I am in la-la-love with them.
 
[And I also have yet to touch up the paint the old knob scratched up behind them.]
I saw these beauties at Hobby Lobby many moons ago and wished I could snatch them all up and replace every knob in this house with them.  Then, a few months ago, I went through a big closet purge and sold a bunch of my dresses and with some of that cash, I went and bought my knobs.  They were 50% off the week I bought them so I got eight of them for around $16.  You probably don’t remember because they didn’t make the greatest impression, but the original knobs on the hutch were plain, stocky wooden ones that I spray painted with some hammered brown spray paint…blah.  These make all the difference in the world.


And that’s it!

But, for more kicks, let’s do a whole history.  Here’s what the hutch looked like when we first got it from a friend (we traded a twin mattress for it):


Then after we moved to Alabama, I painted it:


Then the knobs made things a little happier:

And last, HGTV happened:


What a journey, no?
 

I think I am so passionate for decorating right now because it’s really a challenge.  We don’t have it in our budget to spend much, if anything on home decor right now, so finding ways to make things pretty while only spending a little bit is so fun!  Call me crazy but it’s the truth.  This hutch is the perfect example of that!  But then again, that challenge puts these crazy ideas in my head too which don’t always work out like I picture.  For example, I looked into getting the cranberry-colored clubs chairs in our living room reupholstered and the cost was way, way, way out of our budget.  So, this crazy person is going to try to do it herself.  I haven’t found the perfect, cheap but quality fabric yet to do so, but when I do, look out…and wish me luck.  Lots and lots of luck…and wine, and help, and maybe advice?  :)

TGIF

DIY Mercury Glass

Thanks to the sweet thoughts and therefore actions of friends and family, we’ve collected many a glass vase over the years that once held flowers.  Usually, I store them away under the hutch for a rainy day or a potential project.  To this day I think I’ve done zero things with all of them…until now.  I forgot to take a good before but you can see half of the vase this post is about atop the hutch in this ‘gram:
  
The plan?  To go all mercury glass with it.  Here’s how.

First, the supplies:

- clear glass vase
- Looking Glass spray paint (Krylon)
- spray bottle filled 1/4 of the way with a 50/50 mixture of water and white vinegar
- a few paper towels

There are a few tutorials online on how to do this but in the end I just winged (wung?) it with my own rendition to see what happened (hint: it turned out awesome!)  First, I gave the inside of the vase a few sprays with my water/vinegar mixture.  The mixture beaded when it hit the surface.  I probably spritzed about 3-4 times; not too much.  Just enough to wet the entire inside without forming a pool at the bottom of the vase.  (If you do spray too much, just dump it out and move along.  No big deal.  Mercury glass is very imperfect as it is so mistakes aren’t really mistakes in this project!)
  
[It’s hard to tell how much I actually sprayed in pictures but you can kind of see the foggy, vinegar/water covering on the inside of the vase.]

Then I grabbed the looking glass spray paint.  My Aunt gave me this spray paint three years ago for my b-day and I finally got around to using it!

You can find it here on Amazon (my affiliate link) but I know for a fact that, if you arm yourself with a coupon, it’s cheaper at craft stores (Michael’s and Hobby Lobby sell it).

Next, I sprayed three light coats of the looking glass spray paint inside my vase, waiting about two minutes in between each coat.  Note:  The spray paint started pooling at the bottom of the vase after the second coat so I just picked up the vase and swirled that paint around the inside.  What little still pooled I just left. 

After I had sprayed the three coats, I let the vase sit for 10 minutes and then I carefully dabbed the inside of the vase with the paper towels, removing the beads of water/vinegar.  I also rubbed a little harder in a few larger spots to get a more imperfect look.  (A lot of the tutorials I read called for a light coat of the looking glass spray paint on the outside of the vase after the inside was done but I didn’t do that.)  After dabbing away the vinegar/water, I let the vase sit to dry. 

Behold, our new mercury glass vase:

This would be such a fun project to do for a holiday tablescape – grab a bunch of clear glass vases at your local thrift store and mercury them.  Then line the middle of your table with them.  :)

Ours went back to the top of the hutch which I’ll be sharing in it’s fullness tomorrow (if all goes smoothly in this household today, otherwise it’ll be Monday for sure.) 

I’ve also been working on a super fun project that I was hoping to share before this week is over but it’s looking like it’ll be next week instead because nap times just aren’t long enough…which is totally okay.  :)  You can get a sneak peek here though.

What have you been working on?  Maybe you’re smart and have started spring cleaning instead of dabbling in silly projects like me.  ;)  Anthony told me a few weeks ago we should definitely wash all of our windows soon, inside and out, and guess who hasn’t even started.  I’ll just throw that one over to fall cleaning and blame the rain.

Hope to see you tomorrow!

.           .           .

If you like it, you should put a pin in it:

Welcome Home

Lately I’ve been plugging (slowly) away at a few small projects; little projects that I can get done during the first half of naptime and that don’t cost much, if anything.  This is one of those projects.  This wall of our laundry room has pretty much looked the same for a couple of years or more.
 

The mirror on the wall is one I toothpicked a few years ago and it’s still there so that I can grab a quick glance of myself while walking out the door; trying to make sure I don’t scream overwhelmed-mom-of-toddlers in my soon-to-be public appearance.  (It usually shows that I do anyway…oh well.)  

While I was cleaning out the laundry room last week though, I took the chance to hang a few more things on that wall.  It’s the wall that greets you when you walk in the door so it should be a happy place, right? 

I’d like to think so.

 
This says “happy”, yes?  Maybe?  Better than before at least?  Okay.  We’ll just go with that.

I relocated a cross to the wall from the entry way (it hung there awhile back) and whipped up a little watercolor print spouting “welcome home” to all who enter. 

 
I used the same paint and technique I used to paint this watercolor print in our dining room.  Anybody could do it.  Seriously.  Chances are that, even if you don’t have the best handwriting pen/pencil-wise, it probably looks pretty cool in watercolor.

Then, I grabbed some leftover coral-colored paint I had left from painting this desk, and rubbed a little bit over the bumps on the edge of the frame just to add a little more color to an otherwise neutral wallscape.


This frame has seen better days; it’s a little scuffed and could probably use a new coat of white paint, so I knew that if I didn’t like the coral, I could always give it that touch-up coat right away to hide it.  But, as it turns out, I kinda like it.  I’ll think I’ll keep it that way for awhile…until that touch-up coat, that is.

 

Oh!  And I moved the diy roman shade that hung on the front door prior to its cloak in red-orange to this door.  I don’t think it’ll stay here forever but for now it’s much better than the boring brown shade that was there.  :)

See ya later!

.

.

.

.

.

.

.

#literally